wrapitgraphix · 07-18-2008, 02:13 AM

Ok I need some help I have been printing out of flexi for most of my work and flexi works fine for most of it I am doing a job that is color critical and it is a huge box truck I designed it in tenth scale and am printing on 3m 180c I am using an xc-540 and printing out of versa works from a design made with photo shop cs3. I get thousand of lines through my print like the image is sliced up and it looks crazy when I am printing through versa works the last time I had this problem I pulled the tiff file into flexi and then exported it back out as a tiff file and this solved the problem however the color got jousted so much it wouldn’t be acceptable on this job I am freaking out can someone help me please. When I don’t blow it up 1000% it prints fine it just happens after I blow it up with versa works.

tdgraphics · 07-18-2008, 03:34 PM

I have printed some large stuff, not quite that large though. I tend to use Illustrator and produce it at about 20% to 50% and then scale t up in VersaWorks. Can you produce the images in Flexi as large as possible and then you enlarge then in VersaWorks to the full size.

Can you export as an EPS and a TIFF, and see if there is any difference.

What version of VersaWorks are you running?

Known problems for Version 2.6.2 and their work around scan be found at http://dg4.roland.co.jp/VersaWorks/Issue_E2620.htm

If you are not running version 2.6.2, I suggest that you update to the latest version and then try what you were doing.

Start / Programs / Roland VersaWorks / Online Update then when the box appears on the screen, click check for Updates and let it update your system.

Neil

wrapitgraphix · 07-20-2008, 10:13 PM

Niel TY TY TY TY I havn't tried it yet but the link to the versa work problems looks like it is the problem where compression is not supported.I had called Roland and they didnt have that answer Ty I will let you know how it goes tomorow morning.

wrapitgraphix · 07-21-2008, 11:33 PM

That was the problem versa works 2.6.2 does not support lzw compression saved them as a regular tiff no compression printed no problem again thanks.

tdgraphics · 07-23-2008, 04:24 PM

Glad it all came together.

Neil

07-18-2008, 02:13 AM	#1
wrapitgraphix Junior Member Join Date: Oct 2006 Location: Bellmawr NJ Posts: 27 Printer: Roland XC-540 Flexi SP 8	need printing help with versa works Ok I need some help I have been printing out of flexi for most of my work and flexi works fine for most of it I am doing a job that is color critical and it is a huge box truck I designed it in tenth scale and am printing on 3m 180c I am using an xc-540 and printing out of versa works from a design made with photo shop cs3. I get thousand of lines through my print like the image is sliced up and it looks crazy when I am printing through versa works the last time I had this problem I pulled the tiff file into flexi and then exported it back out as a tiff file and this solved the problem however the color got jousted so much it wouldn’t be acceptable on this job I am freaking out can someone help me please. When I don’t blow it up 1000% it prints fine it just happens after I blow it up with versa works. Attached Thumbnails

07-21-2008, 11:33 PM	#4
wrapitgraphix Junior Member Join Date: Oct 2006 Location: Bellmawr NJ Posts: 27 Printer: Roland XC-540 Flexi SP 8	thank you Niel That was the problem versa works 2.6.2 does not support lzw compression saved them as a regular tiff no compression printed no problem again thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-18-2008, 03:34 PM	#2
tdgraphics Senior Member Join Date: Jan 2006 Location: Allenwood, Co. Kildare, Ireland Posts: 485 Printer: VersaCamm SP540 V,Graphtec Cutter, RS1400C	I have printed some large stuff, not quite that large though. I tend to use Illustrator and produce it at about 20% to 50% and then scale t up in VersaWorks. Can you produce the images in Flexi as large as possible and then you enlarge then in VersaWorks to the full size. Can you export as an EPS and a TIFF, and see if there is any difference. What version of VersaWorks are you running? Known problems for Version 2.6.2 and their work around scan be found at http://dg4.roland.co.jp/VersaWorks/Issue_E2620.htm If you are not running version 2.6.2, I suggest that you update to the latest version and then try what you were doing. Start / Programs / Roland VersaWorks / Online Update then when the box appears on the screen, click check for Updates and let it update your system. Neil

07-20-2008, 10:13 PM	#3
wrapitgraphix Junior Member Join Date: Oct 2006 Location: Bellmawr NJ Posts: 27 Printer: Roland XC-540 Flexi SP 8	Niel TY TY TY TY I havn't tried it yet but the link to the versa work problems looks like it is the problem where compression is not supported.I had called Roland and they didnt have that answer Ty I will let you know how it goes tomorow morning.

07-23-2008, 04:24 PM	#5
tdgraphics Senior Member Join Date: Jan 2006 Location: Allenwood, Co. Kildare, Ireland Posts: 485 Printer: VersaCamm SP540 V,Graphtec Cutter, RS1400C	Glad it all came together. Neil

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)