Jus' Roach · 08-11-2005, 11:39 AM

If I attempt to rotate an image within Veraworks, I get the "I quit error" and the application shuts down.
It only started doing this in the past couple days.
As long as I allow Versaworks decide the orientation on the material there is no problem.
My heartache is I cannot fit image to vinyl size if I have to rotate it for best fit.

mastersignwizard · 08-11-2005, 12:47 PM

have you updated to the newest version of versaworks yet?

Eagle Spirit · 08-11-2005, 02:14 PM

We just updated to the newest version and there seems to be some kinks taken out. In the last version we would have to save as a .prt and send as a native file to get the machine to cut after printing on a consistant basis. Before it would cut sometimes and sometimes it would not! What a waste of material that cost us.

At least so far it seems to be working! Hope I didn't just jinx myself!

Barry · 08-11-2005, 02:17 PM

Versaworks is still a very young application. Hopefully in the coming months/years they will get all the kinks worked out.

Jus' Roach · 08-11-2005, 06:03 PM

Quote:

Originally Posted by mastersignwizard

have you updated to the newest version of versaworks yet?

I am using version 1.4.1 with all updates current (Roland@NET checks for updates, every launch)

Got a message in to my dealer, he thinks it may be a file type compatibility issue. Problem is, it happens with the "bchip.eps" Roland provided color chart, one created in Flexi, one created in Corel, etc. contour line seems to have no effect, it dumps ith or without one.

08-11-2005, 11:39 AM	#1
Jus' Roach Senior Member Join Date: Jun 2005 Location: Colorado Posts: 188 Printer: Roland VersaCamm SP-540v	Cannot rotate an image If I attempt to rotate an image within Veraworks, I get the "I quit error" and the application shuts down. It only started doing this in the past couple days. As long as I allow Versaworks decide the orientation on the material there is no problem. My heartache is I cannot fit image to vinyl size if I have to rotate it for best fit. Attached Thumbnails

08-11-2005, 12:47 PM	#2
mastersignwizard Administrator Join Date: Jun 2005 Location: Arizona Posts: 2,053 Printer: Roland SC-545 EX Pro II V & HP5500	have you updated to the newest version of versaworks yet? __________________ Corey Printing Digital www.printingdigital.net E-Mail: corey@printingdigital.net Direct: 623-444-5200 Roland SC545EX Pro II V w/Triangle MLD Bulk Ink System - HP5500 - Flexi Sign Pro - Sign Lab - Wasatch SoftRip - Onyx - Daige Laminator - Ioline SC72 - Ioline Studio 8 - CorelDRAW X3 - Adobe Creative Suite CS3 - Eye Candy Effects Collection - Vertus Fluid Mask - Flaming Pear - All Andromeda Photoshop-Plugins - PhotoZoom Pro - EyeOne Proof & Profile Maker - Estimate

08-11-2005, 02:17 PM	#4
Barry Administrator Join Date: Jun 2005 Location: Cypress, Texas Posts: 1,977 Printer: Versacamm SP300	Versaworks is still a very young application. Hopefully in the coming months/years they will get all the kinks worked out. __________________ Mimaki JV3-130SPII - Triangle Mild Solvent inks (MLD) Graphtec FC7000 Cutter Wasatch SoftRip v6.0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-11-2005, 02:14 PM	#3
Eagle Spirit Member Join Date: Aug 2005 Location: Woodinville, WA Posts: 82 Printer: SC-545EX	We just updated to the newest version and there seems to be some kinks taken out. In the last version we would have to save as a .prt and send as a native file to get the machine to cut after printing on a consistant basis. Before it would cut sometimes and sometimes it would not! What a waste of material that cost us. At least so far it seems to be working! Hope I didn't just jinx myself!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)