insigniasigns · 08-08-2006, 02:53 PM

I guess software is the best place for this, this problem seems like it would be a software issue more than a hardware issue, but I dunno...

I have a Mimaki JV3-130 printer and a Summa S160D plotter. Onyx 6.5 runs the printer (Cut Server 2.0 drives the plotter for contour cutting prints) and I cut regular vinyl from Signlab v6 through the Signlab Output Spooler. Everything works fine EXCEPT...

if the printer is printing and I go to cut some vinyl (not printed, just regular vinyl) from Signlab the printer stops printing and goes offline. If I'm cutting vinyl from Signlab and I go to print something, the plotter stops cutting. I've not yet had an opportunity to see if the same thing happens when I'm contour cutting prints from CutServer while the printer is running, or vice versa.

It seems to me there's a conflict somewhere between Signlab (or Output Spooler) and Onyx. Anybody ever heard of this?

Thanks,
mike

slangsc · 08-09-2006, 10:37 AM

How is your equipment connected? USB?

insigniasigns · 08-09-2006, 11:24 AM

Mimaki is connected via firewire, summa plotter is connected via serial.

08-08-2006, 02:53 PM	#1
insigniasigns Senior Member Join Date: Dec 2005 Location: Dayton, OH Posts: 192 Printer: Mimaki JV3-130, Onyx, Summa S160D, 54" Royal Sov.	wierd problem with cutter and printer I guess software is the best place for this, this problem seems like it would be a software issue more than a hardware issue, but I dunno... I have a Mimaki JV3-130 printer and a Summa S160D plotter. Onyx 6.5 runs the printer (Cut Server 2.0 drives the plotter for contour cutting prints) and I cut regular vinyl from Signlab v6 through the Signlab Output Spooler. Everything works fine EXCEPT... if the printer is printing and I go to cut some vinyl (not printed, just regular vinyl) from Signlab the printer stops printing and goes offline. If I'm cutting vinyl from Signlab and I go to print something, the plotter stops cutting. I've not yet had an opportunity to see if the same thing happens when I'm contour cutting prints from CutServer while the printer is running, or vice versa. It seems to me there's a conflict somewhere between Signlab (or Output Spooler) and Onyx. Anybody ever heard of this? Thanks, mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-09-2006, 10:37 AM	#2
slangsc Senior Member Join Date: Aug 2005 Location: Colorado Posts: 972 Printer: Roland SC-540 Pro II EX - Triangle MLD Bulk Ink	How is your equipment connected? USB?

08-09-2006, 11:24 AM	#3
insigniasigns Senior Member Join Date: Dec 2005 Location: Dayton, OH Posts: 192 Printer: Mimaki JV3-130, Onyx, Summa S160D, 54" Royal Sov.	Mimaki is connected via firewire, summa plotter is connected via serial.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)