 |
|
 |
|
 |
|
|
|
07-29-2005, 03:30 PM
|
#1 |
|
Cat Herder
Join Date: Jun 2005
Location: Arlington, WA
Posts: 609
Printer: Roland VersaCAMM SP-540V
 |
Corel Fountain Fills
I am using Corel for design and output to SoftRip. I am trying to get an acceptable output from a fountain fill. On screen in Corel and SoftRip, it looks fine, but upon printing it just plain sucks - quite a bit of banding at the color transitions. Ideas as to output settings? I'm exporting as an EPS from Corel.
In this example, it is supposed to have the white to yellow to orange (smooth transition is the point).
__________________
Author of "GraphixCALC" sign pricing software. - - - - - - - - - - If you think you can or you think you can't, you're right! - - - - - - - - - - Roland SP-540V w/Triangle MLD Bulk Ink System / Wasatch SoftRip 6.4 / DingTec 60" Cold Laminator / SummaCut D60 / CorelDRAW X3 / Adobe Creative Suite CS2 / AlienSkin Eye Candy / PhotoZoom Pro / CoCut Pro 13 / EyeOne Proof - - - - - - - - - - For we wrestle not against flesh and blood... |
|
|
|
07-29-2005, 04:01 PM
|
#2 |
|
Administrator
Join Date: Jun 2005
Location: Cypress, Texas
Posts: 1,977
Printer: Versacamm SP300
|
Corel does not export gradients well. Either try creating the gradient in another application (Flexi, Illistrator). Honestly PhotoShop will put out the best gradients.
|
|
|
|
|
07-29-2005, 05:21 PM
|
#3 |
|
Cat Herder
Join Date: Jun 2005
Location: Arlington, WA
Posts: 609
Printer: Roland VersaCAMM SP-540V
|
These were done in Flexi 7.5. The blue "chrome" effect looks fine, but I still get some poor transition from yellow to orange, but the orange to red looks fine.
__________________
Author of "GraphixCALC" sign pricing software. - - - - - - - - - - If you think you can or you think you can't, you're right! - - - - - - - - - - Roland SP-540V w/Triangle MLD Bulk Ink System / Wasatch SoftRip 6.4 / DingTec 60" Cold Laminator / SummaCut D60 / CorelDRAW X3 / Adobe Creative Suite CS2 / AlienSkin Eye Candy / PhotoZoom Pro / CoCut Pro 13 / EyeOne Proof - - - - - - - - - - For we wrestle not against flesh and blood... |
|
|
|
|
07-29-2005, 06:48 PM
|
#4 |
|
Administrator
Join Date: Jun 2005
Location: Cypress, Texas
Posts: 1,977
Printer: Versacamm SP300
|
Chris,
There may just be some colors in that gradent that are not easily produced with CMYK. Orange is generally a fairly difficult color to reproduce well. |
|
|
|
|
07-29-2005, 07:04 PM
|
#5 |
|
Cat Herder
Join Date: Jun 2005
Location: Arlington, WA
Posts: 609
Printer: Roland VersaCAMM SP-540V
|
Here is another I did totally within Flexi to see how it compares to Corel in the gradient. The gradient (as seen in the digital pic) goes from Orange to yellow, to a strip of white, then to yellow again. These are unacceptable results. Is this just a color combo to avoid then? I had no idea. Kind of a bummer really.
__________________
Author of "GraphixCALC" sign pricing software. - - - - - - - - - - If you think you can or you think you can't, you're right! - - - - - - - - - - Roland SP-540V w/Triangle MLD Bulk Ink System / Wasatch SoftRip 6.4 / DingTec 60" Cold Laminator / SummaCut D60 / CorelDRAW X3 / Adobe Creative Suite CS2 / AlienSkin Eye Candy / PhotoZoom Pro / CoCut Pro 13 / EyeOne Proof - - - - - - - - - - For we wrestle not against flesh and blood... |
|
|
|
|
07-29-2005, 10:11 PM
|
#6 |
|
Administrator
Join Date: Jun 2005
Location: Cypress, Texas
Posts: 1,977
Printer: Versacamm SP300
|
Chris,
I printed a similiar file on my machine and it printed fine. Send me over a copy of the one your printing and Ill see how it comes out on my machine.
__________________
Mimaki JV3-130SPII - Triangle Mild Solvent inks (MLD) Graphtec FC7000 Cutter Wasatch SoftRip v6.0 |
|
|
|
|
07-30-2005, 01:24 AM
|
#7 |
|
Cat Herder
Join Date: Jun 2005
Location: Arlington, WA
Posts: 609
Printer: Roland VersaCAMM SP-540V
|
PROBLEM SOLVED...I was given the wrong media profiles for my machine. I now have the correct ICC profile and so far so good thanks to both Barry and Corey. YEAH!!!
__________________
Author of "GraphixCALC" sign pricing software. - - - - - - - - - - If you think you can or you think you can't, you're right! - - - - - - - - - - Roland SP-540V w/Triangle MLD Bulk Ink System / Wasatch SoftRip 6.4 / DingTec 60" Cold Laminator / SummaCut D60 / CorelDRAW X3 / Adobe Creative Suite CS2 / AlienSkin Eye Candy / PhotoZoom Pro / CoCut Pro 13 / EyeOne Proof - - - - - - - - - - For we wrestle not against flesh and blood... |
|
|
|
|
07-30-2005, 12:06 PM
|
#8 |
|
Administrator
Join Date: Jun 2005
Location: Cypress, Texas
Posts: 1,977
Printer: Versacamm SP300
|
No problem Chris, just glad we could help figure out the problem.
__________________
Mimaki JV3-130SPII - Triangle Mild Solvent inks (MLD) Graphtec FC7000 Cutter Wasatch SoftRip v6.0 |
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
