Donald E. Ethredge · 08-05-2005, 04:19 PM

I recieved my copy of the software that I won on this Site..Thanks Barry and the people at Inspire...I have yet to load the software, Since I had a question on if it could be loaded on multiple computers without needing other site lic. etc. With that in mind I dropped inspire email on the support email, Figured if nothing else this would give a real world test on how fast you get answers to emailed questions. I'll post how the software loads and how well and easy it is to use in the next few weeks. sent email at 3:06 on August 5th, Since it is late in the day I will understand if I don't get a answer back until monday.

Barry · 08-05-2005, 05:16 PM

Donald,

My understanding from talking with Mike at Inspire is that you have an unlimitted site licenese. This means you can install on as many computers at your location as you like.

jayhawksigns · 08-05-2005, 05:38 PM

Quote:

Originally Posted by Barry

Donald,

My understanding from talking with Mike at Inspire is that you have an unlimitted site licenese. This means you can install on as many computers at your location as you like.

Thats the answer I got also when discussing the differences between this current version of Inspire and what Scanvec used to peddle.

It does look like great software, hell we used to use it everyday, but we are to entrenched with Flexi I think to switch back now.

Donald E. Ethredge · 08-06-2005, 09:38 PM

Yes that is is what I was told...they responded in a few hours, I feel that was pretty good..I'll load it on the two shop computers Monday adn post how things go...

Barry · 08-06-2005, 10:38 PM

This is a huge deal when compaired to other software in its class. No dongle to deal with and run it on multiple PC's without any worries.

Donald E. Ethredge · 08-08-2005, 04:39 PM

Well loaded it up today, seems pretty user friendly..actually had a omega look to it..I did have one issue it isn't very friendly to my signlab dongle so I need to see if that can be worked around so I had to do a restore back to a few days before to get my signlab running again. Going to take it home and play with it on the laptop. I'll get back on it...

Barry · 08-08-2005, 05:16 PM

Thanks for the info Donald... You might want to contact Mike about the dongle issue, he may have a workaround.

08-05-2005, 04:19 PM	#1
Donald E. Ethredge Member Join Date: Jul 2005 Posts: 81 Printer: Gerber Edge 2, Roland 540V, Brother GT-541	Inspire XPpro.. I recieved my copy of the software that I won on this Site..Thanks Barry and the people at Inspire...I have yet to load the software, Since I had a question on if it could be loaded on multiple computers without needing other site lic. etc. With that in mind I dropped inspire email on the support email, Figured if nothing else this would give a real world test on how fast you get answers to emailed questions. I'll post how the software loads and how well and easy it is to use in the next few weeks. sent email at 3:06 on August 5th, Since it is late in the day I will understand if I don't get a answer back until monday.

08-05-2005, 05:16 PM	#2
Barry Administrator Join Date: Jun 2005 Location: Cypress, Texas Posts: 1,977 Printer: Versacamm SP300	Donald, My understanding from talking with Mike at Inspire is that you have an unlimitted site licenese. This means you can install on as many computers at your location as you like. __________________ Mimaki JV3-130SPII - Triangle Mild Solvent inks (MLD) Graphtec FC7000 Cutter Wasatch SoftRip v6.0

08-06-2005, 10:38 PM	#5
Barry Administrator Join Date: Jun 2005 Location: Cypress, Texas Posts: 1,977 Printer: Versacamm SP300	This is a huge deal when compaired to other software in its class. No dongle to deal with and run it on multiple PC's without any worries. __________________ Mimaki JV3-130SPII - Triangle Mild Solvent inks (MLD) Graphtec FC7000 Cutter Wasatch SoftRip v6.0

08-08-2005, 05:16 PM	#7
Barry Administrator Join Date: Jun 2005 Location: Cypress, Texas Posts: 1,977 Printer: Versacamm SP300	Thanks for the info Donald... You might want to contact Mike about the dongle issue, he may have a workaround. __________________ Mimaki JV3-130SPII - Triangle Mild Solvent inks (MLD) Graphtec FC7000 Cutter Wasatch SoftRip v6.0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-06-2005, 09:38 PM	#4
Donald E. Ethredge Member Join Date: Jul 2005 Posts: 81 Printer: Gerber Edge 2, Roland 540V, Brother GT-541	Yes that is is what I was told...they responded in a few hours, I feel that was pretty good..I'll load it on the two shop computers Monday adn post how things go...

08-08-2005, 04:39 PM	#6
Donald E. Ethredge Member Join Date: Jul 2005 Posts: 81 Printer: Gerber Edge 2, Roland 540V, Brother GT-541	Well loaded it up today, seems pretty user friendly..actually had a omega look to it..I did have one issue it isn't very friendly to my signlab dongle so I need to see if that can be worked around so I had to do a restore back to a few days before to get my signlab running again. Going to take it home and play with it on the laptop. I'll get back on it...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)