PGilleland · 03-23-2007, 05:28 PM

digital wrap/install using 3m control tac and matching lam

What would be your ideas of price per s.f. for a trailer like this. Both sides, back and front, trailer is approx 16' long and approx 6' tall.

Thanks in advance for your input

PGilleland · 03-24-2007, 09:56 AM

Is $15 p.s.f. too much
Lots of rivets and is is quite used and dirty. I'm worried we won't be able to get it clean enough for a good contact. What are your thoughts on this?

nitr0 graphics · 03-25-2007, 10:18 PM

I wouldnt be afraid to ask 15sf.

advsign · 03-26-2007, 07:18 AM

At least $15 per sqft unless the design time gets over 4 hours.

PGilleland · 03-26-2007, 07:46 AM

Thanks!

Patrick · 03-26-2007, 02:02 PM

are you guys saying $15/sq. ft. for design, print, lam and install? I.e. both sides of trailer - 6x16 = 96 sq ft per side = 192 total (sides only) x$15 = $2880.00 complete job?

Just curious. I have a cube van coming in a week or two for a box wrap, and haven't given the customer a firm bid yet.

03-23-2007, 05:28 PM	#1
PGilleland Senior Member Join Date: Jun 2005 Location: Rainbow TX Posts: 353 Printer: Mimaki JV3 160SP	your ideas on pricing digital wrap/install using 3m control tac and matching lam What would be your ideas of price per s.f. for a trailer like this. Both sides, back and front, trailer is approx 16' long and approx 6' tall. Thanks in advance for your input Attached Thumbnails __________________ Paula http://www.signs67.com signs@signs67.com

03-24-2007, 09:56 AM	#2
PGilleland Senior Member Join Date: Jun 2005 Location: Rainbow TX Posts: 353 Printer: Mimaki JV3 160SP	Is $15 p.s.f. too much Lots of rivets and is is quite used and dirty. I'm worried we won't be able to get it clean enough for a good contact. What are your thoughts on this? __________________ Paula http://www.signs67.com signs@signs67.com

03-25-2007, 10:18 PM	#3
nitr0 graphics Junior Member Join Date: Dec 2006 Location: MN Posts: 5 Printer: mutoh falcon outdoor 48, Graphtec fc7000	I wouldnt be afraid to ask 15sf. __________________ NITRO GRAPHICS

03-26-2007, 07:46 AM	#5
PGilleland Senior Member Join Date: Jun 2005 Location: Rainbow TX Posts: 353 Printer: Mimaki JV3 160SP	Thanks! __________________ Paula http://www.signs67.com signs@signs67.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-26-2007, 07:18 AM	#4
advsign Senior Member Join Date: Jun 2005 Location: Daphne, Al Posts: 161 Printer: Roland SolJet SC-545EX	At least $15 per sqft unless the design time gets over 4 hours.

03-26-2007, 02:02 PM	#6
Patrick Member Join Date: Jan 2007 Location: Wisconsin Posts: 60 Printer: Roland VersaCamm SP300V	are you guys saying $15/sq. ft. for design, print, lam and install? I.e. both sides of trailer - 6x16 = 96 sq ft per side = 192 total (sides only) x$15 = $2880.00 complete job? Just curious. I have a cube van coming in a week or two for a box wrap, and haven't given the customer a firm bid yet.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)