jetGrafik · 07-24-2006, 01:20 PM

8 color / Pigment Ink
Take-up Reel
Includes the inks in the machine, and (13) sealed cartridges (a full set+)
Includes PC with NT Workstation/Monitor/and ColorRIP software

I purchased this machine as part of a lot from a fine art repro shop that went out of business. I don't really do any art prints, so off it should go. (I kept the Seal 600D, and Fletcher trimmer)

The machine received a PM by CammTech New England approximately 6-8 mos ago, and one head was replaced at that time. The printer has seen very little action since.

While I did not take it through the paces, it appears to work just fine. I set up the rip, and ran a couple of test prints. Head test looks good.

Cosmetically, the printer is looks excellent, with the only issue being one caster needs to be replaced. Otherwise it's excellent.

I will also include a bunch of media that came with the machine.

The printer is in my warehouse in Fall River, MA, ready for testing or to be picked up. (yes, I have a dock for easy pickup)

Take it away for $3495 obo

Call Ernie @ 508-676-6148

AllSquare Jason · 07-31-2006, 04:30 PM

Bump for a GREAT DEAL. Wish you were closer to the Carolina's!!!

- this would make an AWESOME Dye Sub Printer!!!!

BDodson827 · 08-01-2006, 11:09 AM

Well, how hard would it be to ship something liek that to Texas? Assuming I picked it up in a moving truck, of some sort. Just locking the heads, and strapping it down?

jetGrafik · 08-01-2006, 02:13 PM

Well, I'm not an expert at the moving, but I'm guessing it would be done just as you say....Empty the waste bottle, lockdown the head, wrap it and go.

It's the shipping distance that pretty much makes or breaks the deal.

~~E

P.S. Thanks for the bump Jason!

BDodson827 · 08-01-2006, 02:40 PM

Quote:

Originally Posted by jetGrafik

Well, I'm not an expert at the moving, but I'm guessing it would be done just as you say....Empty the waste bottle, lockdown the head, wrap it and go.

It's the shipping distance that pretty much makes or breaks the deal.

~~E

P.S. Thanks for the bump Jason!

Hmmm, you'd have me hook, line and sinker if we could pull MA & TX closer together....

jetGrafik · 10-28-2006, 12:21 PM

Sold locally for $4K

Thanks to everyone who looked and commented!

~~ Ernie

07-24-2006, 01:20 PM	#1
jetGrafik Junior Member Join Date: Aug 2005 Posts: 18 Printer: VersaCAMM SP-540V	Roland HiFi Jet Pro (FJ500) For Sale 8 color / Pigment Ink Take-up Reel Includes the inks in the machine, and (13) sealed cartridges (a full set+) Includes PC with NT Workstation/Monitor/and ColorRIP software I purchased this machine as part of a lot from a fine art repro shop that went out of business. I don't really do any art prints, so off it should go. (I kept the Seal 600D, and Fletcher trimmer) The machine received a PM by CammTech New England approximately 6-8 mos ago, and one head was replaced at that time. The printer has seen very little action since. While I did not take it through the paces, it appears to work just fine. I set up the rip, and ran a couple of test prints. Head test looks good. Cosmetically, the printer is looks excellent, with the only issue being one caster needs to be replaced. Otherwise it's excellent. I will also include a bunch of media that came with the machine. The printer is in my warehouse in Fall River, MA, ready for testing or to be picked up. (yes, I have a dock for easy pickup) Take it away for $3495 obo Call Ernie @ 508-676-6148 Last edited by jetGrafik : 07-24-2006 at 04:35 PM.

07-31-2006, 04:30 PM	#2
AllSquare Jason Authorized Vendor/Manufacture Join Date: Dec 2005 Location: Greenville, SC Posts: 148 Printer: Roland 545ex / 300V	Bump for a GREAT DEAL. Wish you were closer to the Carolina's!!! - this would make an AWESOME Dye Sub Printer!!!! __________________ Jason Curd Solvent Media & Printer Spe****t AllSquare Computer Technologies** Toll Free - 888-286-8801 www.AllSquare.com JasonCurd@aol.com Stocking Media by: Arlon - MACTac - Roland - Sihl - GMI - 3M - Avery - Oce - Colorspan - Beaver Paper- Sawgrass - Lyson - SEAL

08-01-2006, 11:09 AM	#3
BDodson827 Super Moderator Join Date: Apr 2006 Location: Dallas Posts: 780 Printer: 74" Roland - Dye Sub Convert	Well, how hard would it be to ship something liek that to Texas? Assuming I picked it up in a moving truck, of some sort. Just locking the heads, and strapping it down? Last edited by BDodson827 : 08-01-2006 at 11:29 AM.

08-01-2006, 02:13 PM	#4
jetGrafik Junior Member Join Date: Aug 2005 Posts: 18 Printer: VersaCAMM SP-540V	Shipping the printer... Well, I'm not an expert at the moving, but I'm guessing it would be done just as you say....Empty the waste bottle, lockdown the head, wrap it and go. It's the shipping distance that pretty much makes or breaks the deal. ~~E P.S. Thanks for the bump Jason!

10-28-2006, 12:21 PM	#6
jetGrafik Junior Member Join Date: Aug 2005 Posts: 18 Printer: VersaCAMM SP-540V	Gone Sold locally for $4K Thanks to everyone who looked and commented! ~~ Ernie

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode