[Barry]

Originally Posted by HandLaminator

While cleaning and checking out the wiper I forgot to put the head back into the home position. I left it alone for 2 days and when I went to print I got nothing. I have let it set in the home position with extra cleaning fluid applied to the pads in the cleaning station. Every few hours I try a Nozzle check and do a head cleaning. I've got about half the jets firing after an overnite soak and 3 cleanings spaced 2-3 hours apart. Is there a faster way of getting the head firing full throttle again?

I trid to print a block of one color that had only one jet firing and got nowhere. Seems to me that this would be hard on the ink pump too.

You need to make sure that your capping stations are making a really good seal on your heads or your pump will not be able to make enough suction to free up the clogged nozzles.

2 days un-capped is an extremely long amount of time and you may not even be able to free all the jets.