[HandLaminator]

While cleaning and checking out the wiper I forgot to put the head back into the home position. I left it alone for 2 days and when I went to print I got nothing. I have let it set in the home position with extra cleaning fluid applied to the pads in the cleaning station. Every few hours I try a Nozzle check and do a head cleaning. I've got about half the jets firing after an overnite soak and 3 cleanings spaced 2-3 hours apart. Is there a faster way of getting the head firing full throttle again?

I trid to print a block of one color that had only one jet firing and got nowhere. Seems to me that this would be hard on the ink pump too.