tdgraphics · 07-18-2008, 03:34 PM

I have printed some large stuff, not quite that large though. I tend to use Illustrator and produce it at about 20% to 50% and then scale t up in VersaWorks. Can you produce the images in Flexi as large as possible and then you enlarge then in VersaWorks to the full size.

Can you export as an EPS and a TIFF, and see if there is any difference.

What version of VersaWorks are you running?

Known problems for Version 2.6.2 and their work around scan be found at http://dg4.roland.co.jp/VersaWorks/Issue_E2620.htm

If you are not running version 2.6.2, I suggest that you update to the latest version and then try what you were doing.

Start / Programs / Roland VersaWorks / Online Update then when the box appears on the screen, click check for Updates and let it update your system.

Neil

07-18-2008, 03:34 PM	#2
tdgraphics Senior Member Join Date: Jan 2006 Location: Allenwood, Co. Kildare, Ireland Posts: 485 Printer: VersaCamm SP540 V,Graphtec Cutter, RS1400C	I have printed some large stuff, not quite that large though. I tend to use Illustrator and produce it at about 20% to 50% and then scale t up in VersaWorks. Can you produce the images in Flexi as large as possible and then you enlarge then in VersaWorks to the full size. Can you export as an EPS and a TIFF, and see if there is any difference. What version of VersaWorks are you running? Known problems for Version 2.6.2 and their work around scan be found at http://dg4.roland.co.jp/VersaWorks/Issue_E2620.htm If you are not running version 2.6.2, I suggest that you update to the latest version and then try what you were doing. Start / Programs / Roland VersaWorks / Online Update then when the box appears on the screen, click check for Updates and let it update your system. Neil