02-22-2008, 06:43 PM
Super Moderator
Join Date: Nov 2005
Location: San Diego
Posts: 1,414
Printer: HP9000, HP45500, JV3, Onyx
sounds like you're spot on. Exactly where to restrict is ultimately a judgement call. I just did a profile today for a Korographics wallcover on the jv3 that needed ink restricted as much as possible. So i let the C delta e go above 1 just to satisfy an extra need for less ink to control dot gain on this thick stuff. It's really hard to see 1 or 2 delta e in rich colors, so i really didn't give up much. Normally staying at or just below 1 delta e is the way to go.
But like a lot of this color stuff it can be a judgement call at times when you're dealing with poorly performing system.
But like a lot of this color stuff it can be a judgement call at times when you're dealing with poorly performing system.
__________________
--
Pacific Print Works
"For every big problem there is a simple answer, and it's wrong."
- Author unknown
--
Pacific Print Works
"For every big problem there is a simple answer, and it's wrong."
- Author unknown
