01-10-2008, 10:26 PM
Junior Member
Join Date: Jan 2008
Location: Poland, EU
Posts: 9
Printer: JETI-3312, ROLAND 745 EX, COLORSPAN9840UV
Colorspan 9840
Hi there!
If've got 9840 + Kodiak RIP software and since the day one i'm suffering for some issues.
1/ sometimes it prints jobs shorter then should be despite the fact that dimensiones are fine for ex. when i'm printing one job in 3 copies 2 of them are fine but 3rd is shorter for about 10mm - media type and size are exactly the same
2/ jobs has to be much smaller (especialy at lenght - 10-12 mm) than print area when printing edge-to-edge with margins at 0 and overprint 2mm
3/ from time to time when printing is finished and media is out i get notify that there is for ex. 30 cm remaining (of course lenght measured by printer and lenght of media are the same)
has anyone had the same issue or know the solution, get any tips or advices ?
thanks for your help
ps. sorry for my english it's not my first language
If've got 9840 + Kodiak RIP software and since the day one i'm suffering for some issues.
1/ sometimes it prints jobs shorter then should be despite the fact that dimensiones are fine for ex. when i'm printing one job in 3 copies 2 of them are fine but 3rd is shorter for about 10mm - media type and size are exactly the same
2/ jobs has to be much smaller (especialy at lenght - 10-12 mm) than print area when printing edge-to-edge with margins at 0 and overprint 2mm
3/ from time to time when printing is finished and media is out i get notify that there is for ex. 30 cm remaining (of course lenght measured by printer and lenght of media are the same)
has anyone had the same issue or know the solution, get any tips or advices ?
thanks for your help
ps. sorry for my english it's not my first language
