10-08-2007, 05:51 PM
Member
Join Date: Oct 2006
Location: Seattle
Posts: 41
Printer: ValueJet, Graphtec FC-7000, HP Z6100, T1100, Z2100
Scotty,
In my experience with the 9840uv I've found it to be 1 or 2 possible scenarios and you're right on:
1) Overall ink limit of your particular profile is too high not allowing adequate curing of the ink
2) UV light source is running low not allowing proper heat to cure ink fully. Most of the times I've found it's the lamps are running low versus option #1.
When was the last time you replaced the lamps? I must say, I've never had a durability issue with the 9840 outside of what I've just explained. Seems to be very stable in my opinion.
Call me if you have questions
Matt
(425) 774-3136
In my experience with the 9840uv I've found it to be 1 or 2 possible scenarios and you're right on:
1) Overall ink limit of your particular profile is too high not allowing adequate curing of the ink
2) UV light source is running low not allowing proper heat to cure ink fully. Most of the times I've found it's the lamps are running low versus option #1.
When was the last time you replaced the lamps? I must say, I've never had a durability issue with the 9840 outside of what I've just explained. Seems to be very stable in my opinion.
Call me if you have questions
Matt
(425) 774-3136
